Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 93.9 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chRoof renovation · Eschenbach (SG)

At a glance
Small project
CHF 16'700 – CHF 38'300
Typical project
CHF 30'200 – CHF 66'600
Large project
CHF 50'500 – CHF 109'100
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 70 m² | CHF 16'700 | CHF 38'300 | CHF 400 |
| Typical project | 140 m² | CHF 30'200 | CHF 66'600 | CHF 300 |
| Large project | 245 m² | CHF 50'500 | CHF 109'100 | CHF 300 |
Computed with our estimator for Eschenbach (SG) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Eschenbach (SG), the federal building register lists 2'519 residential buildings and 4'907 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
44 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
47 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 8 % | 6.2 % |
| Heating oil | 23 % | 13.9 % |
| District heating | 1 % | 0.7 % |
| Heat pump | 47 % | 45.4 % |
| Electricity | 3 % | 21.9 % |
| Wood | 18 % | 7 % |
| Solar thermal | 0 % | 4.8 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
11.6 % of buildings mix housing with shops or offices.
For renovation projects in Eschenbach, the RegBL data provides crucial insights. Heritage protection applies to 19 of the 44 identified buildings, making early contact with the municipality essential for permit planning. Regarding building volume, the median is 1032 m3 based on the SIA 416 standard, though this figure represents only 10 out of 1785 residential buildings. Given this partial data coverage, homeowners should conduct a specific assessment of their property. Understanding these precise metrics is vital for accurately scaling your heating systems and insulation upgrades to ensure your renovation remains both efficient and compliant with local standards.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Insulating the roof at the same time as the covering is a crucial step to optimize your home's energy performance. Proper insulation significantly reduces heat loss, leading to lasting lower heating bills.
As part of your renovation, it is helpful to know that these energy efficiency measures are often eligible for financial support via the Buildings Programme.
Remember to check the eligibility criteria to reduce the overall cost of your renovation project significantly.
If your roof is already equipped with solar panels, their removal and refitting must be budgeted for from the start of your project. This technical step requires qualified professionals to ensure the system works correctly after the work is completed.
It is advisable to include these specific labor costs in your initial estimate. Rigorous planning helps avoid financial surprises during the project.
Use the RenoIndex estimator to transparently include these additional costs in your overall renovation budget.
Geographical location and altitude directly influence the technical choices for your roof. In some areas, heavy snow loads and repeated frost cycles require highly resistant materials and a reinforced structure.
The choice of tiles or waterproofing systems must take these factors into account to prevent risks of leaks or structural damage in the long run.
Discuss the most durable options adapted to the local climate with your roofer to ensure the longevity of your investment.
A successful renovation relies on detailed planning. Beyond the choice of materials, it is essential to consider all ancillary costs, such as scaffolding installation or waste management.
In Switzerland, prices can vary depending on the building's specific features and local company rates. To get a clear view, use our RenoIndex tool, which will provide you with a price range in Swiss francs tailored to your project.
This step will help you better manage your overall budget.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3988 Obergoms · about 93.9 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.ch2827 Mervelier · about 105.1 km
Dubach Construction Bois Sàrl specializes in timber construction, roofing, and insulation services.
solubois.ch2747 Seehof · about 107.6 km
Welibois S.A. is a company specializing in carpentry, joinery, insulation, and sawmill services.
welibois.ch2746 Crémines · about 111.1 km
Specialized company for painting, facade renovation, surface cleaning, and wood treatment for both interior and exterior residential projects.
malerei-top-demestre.comSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Costs vary depending on the area, chosen materials, and insulation. To get a precise estimate in Swiss francs tailored to your home's specifics, we recommend using the free RenoIndex cost estimator. It will give you a realistic range.
Yes, the Buildings Programme offers financial aid for energy efficiency works, such as thermal insulation. It is recommended to check the current national conditions before starting your work to maximize your chances of obtaining a grant.
Most roof renovation works require a permit, especially if the exterior appearance is altered. Contact your local municipality to find out the specific administrative procedures for your property and avoid any violation of current urban planning regulations.
You must budget for the removal and refitting of existing panels. It is best to consult an expert to assess the condition of the panels before reinstalling them on your new roof to ensure optimal energy efficiency.